December 21, 2016

Singer 66 (1914)

I can generally see thru the grime to determine if the machine can be saved and this one had an OK look to it.

I oiled it, plugged it in, and the level of quiet running is just amazing; smooth as silk!

I'll do a slow restore and am only disappointment that it has no reverse otherwise I would call it a keeper.


Finished the Restoration, had to buy the bobbin cover new, every one of these things is missing the bobbin cover, what - up?


I have the stand making down, they are not pretty but especially in this case because Singer didn't put the convenient 4 manufacturing posts underneath it really needs something to sit on. The base is attached with drops of silicone sealer in the corners and so is easy to remove.

I'm going to give it a try now that its ready!

6 comments:

  1. How to reverse sew on an old machine: stop with the needle down, turn your work around, sew in the opposite direction (reverse).

    How to end your seam instead of backtacking: reduce your stitch length to as low as it will go and make a few stitches.

    ReplyDelete
    Replies
    1. Thanks, I've never tried the tiny stitch method

      Delete
    2. Are you the "Lee Knott" that is the "owner" of the Elna Heirloom Sewing Machines" on yahoogroups? As one of the current moderators, we are trying to contact you. There are some functions that only the "owner" can access, and if you are no longer interested in the group, you need to make a moderator an owner. Thanks.

      Delete
    3. If so, email me at palrefrev@node1internet.com please.

      Delete
  2. great restoration! I am working on a 1917 66 with a hand wheel. I love the base you built. Would you be willing to share your design for it?

    ReplyDelete
    Replies
    1. Hi Indy, I got this question a couple of times so here is the answer in a post
      http://mivintagesewingmachines.blogspot.com/2017/08/diy-vintage-sewing-machine-base.html

      Good luck, Tom

      Delete